MULTIPLE CHOICE. Choose the one alternative that best completes the statement or

Question

MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question.

1) After issuing the proper command to configure a static route, the prompt does which of the following?      1) _______

A) Does not change; remains at router (config)#

B) Changes to router(config-static)

C) Changes to router (config-static)#

D) Does not change; remains at router (config#)

TRUE/FALSE. Write 'T' if the statement is true and 'F' if the statement is false.

2) A computer with an IP address of 10.10.5.1 sends a data packet with a destination IP address of 10.5.10.20 using a subnet mask of 255.255.255.0. The packet stays in the LAN. True or False?                2) _______

MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question.

3) Which of the following is not an advantage of OSPF?      3) _______

A) Link-state changes are immediately reported.

B) It uses VLSM.

C) It's not a proprietary protocol.

D) It's very easy to implement.

4) What is the purpose of variable length subnet masks?    4) _______

A) They are the same as classful addressing.

B) They are not recommended in modern computer networks.

C) They reduce the number of bits required in a subnet mask from 32 to 24.

D) They minimize wasted IP address space when interconnecting subnets.

TRUE/FALSE. Write 'T' if the statement is true and 'F' if the statement is false.

5) Advertising a network means the routing table containing the network is shared with its neighbor routers. True or False?   5) _______

MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question.

6) From which prompt is the command to specify RIP routing issued?         6) _______

A) Router(config)              B) Router(config-router)#

C) Router(config)>            D) Router(config)#

7) What is the administrative distance of the RIP routing protocol?                7) _______

A) 90      B) 110    C) 120    D) 1        E) 100

8) Which of the following commands can be used to display the routes configured on the router?      8) _______

A) router# show rip route               B) router> show ip route

C) router# show ip route D) router# show route

9) Which of the following does the OSPF routing protocol use to verify that a link between to routers is active and the routers are communicating?               9) _______

A) Ping B) LSAs C) ARP messages              D) "Hello" packets

10) A static route is entered from which command prompt? (select one)       10) ______

A) router#

B) router(config-static)#

C) router(config#)

D) router>

E) router(config)

Explanation / Answer

1) A

2)

3) D   

4) D

5) TRUE

6) B

7) C

8) C

9) D

10) C

Related Questions

Navigate

• Browse (All)
• Browse M
• Subjects

Integrity-first tutoring: explanations and feedback only — we do not complete graded work. Learn more.