One technique for making images of surfaces at the nanometer scale, including me
ID: 1471474 • Letter: O
Question
One technique for making images of surfaces at the nanometer scale, including membranes and biomolecules, is dynamic atomic force microscopy. In this technique, a small tip is attached to a cantilever, which is a flexible, rectangular slab supported at one end, like a diving board. The cantilever vibrates, so the tip moves up and down in simple harmonic motion. In one operating mode, the resonant frequency for a cantilever with force constant k = 1000 N/m is 100 kHz. As the oscillating tip is brought within a few nanometers of the surface of a sample (as shown in (Figure 1) ), it experiences an attractive force from the surface. For an oscillation with a small amplitude (typically, 0.050 nm), the force F that the sample surface exerts on the tip varies linearly with the displacement x of the tip, |F|=ksurfx, where ksurfis the effective force constant for this force. The net force on the tip is therefore k+ksurf, and the frequency of the oscillation changes slightly due to the interaction with the surface. Measurements of the frequency as the tip moves over different parts of the sample's surface can provide information about the sample.
One technique for making images of surfaces at the nanometer scale, including membranes and biomolecules, is dynamic atomic force microscopy. In this technique, a small tip is attached to a cantilever, which is a flexible, rectangular slab supported at one end, like a What is the mechanical energy of the vibration when the tip is not interacting with the surface?Explanation / Answer
when the tip is not interacting with the surface
k = 1000 N/m
mechanical energy = E = 0.5*K*A^2
A = amplitude = 0.05*10^-9 m
E = 0.5*1000*(0.05*10^-9)^2
E = 1.2*10^-18 J <<---------answer
Related Questions
Navigate
Integrity-first tutoring: explanations and feedback only — we do not complete graded work. Learn more.