1. What type of startup rmware best supports Windows 10 with regard to device op

Question

1. What type of startup rmware best supports Windows 10 with regard to device operation
and management?
a. BIOS
b. GPT
c. UEFI
d. MBR
2. A VHD has been created using the Disk Management utility. Before the newly created VHD
can be used to store les, it must be ___________________.
a. detached
b. congured as a dynamic disk
c. set to GPT partition style
d. initialized
e. set to MBR partition style
3. A storage ___________________ acts as a logical container grouping multiple physical disks.
4. A drive is attached to a custom hardware RAID controller. It does not show up as being
available for use with Storage Spaces. To make the drive appear for use with Storage Spaces,
the hardware RAID controller must be ___________________.
a. congured as mirrored RAID 1
b. BIOS managed
c. congured as parity RAID 5
d. UEFI managed
e. removed
5. You have just plugged a USB portable hard drive into an older laptop and the disk has not
appeared as available. You are concerned that the hard disk controller hardware has not
been recognized by the computer. What utility would you use to verify that the controller is
functioning correctly?
a. DiskPart
b. Disk Management console
c. USB Management console
d. Device Manager
e. none of the above

6. You have recently added a new USB portable hard disk to your computer. You have received
a notice that new hardware has been detected, but the disk does not appear as a storage location.
Which utility would you use to verify that the hard disk’s logical disk information is
recognized by Windows 10? (Choose all that apply.)
a. DiskPart
b. Disk Management console
c. USB Management console
d. Device Manager
e. none of the above
7. The number of physical disks required to implement three-way resilience for a Storage
Spaces volume is ___________________.
a. 1
b. 2
c. 3
d. 5
e. 7
8. The preferred technology to set up disk storage with mirrored fault tolerance for a user’s
backup data is ___________________.
a. basic disks
b. dynamic disks
c. hardware-based RAID 5
d. Storage Spaces
e. hardware-based RAID 1
9. An NTFS partition has disk quotas enabled. You would like to run a weekly report that
summarizes how much space each user is consuming. The ___________________ utility allows
you to review quota details from the command line.
a. convert
b. fsutil
c. get-diskquota
d. diskpart
e. dsquota
10. A 127 GB volume on a dynamic disk can be formatted with which le system?
a. FAT
b. FAT32
c. NTFS
d. ReFS
11. Windows 10 supports locally encrypted les stored on which of the following types of partitions?
(Choose all that apply.)
a. NTFS
b. ReFS
c. FAT
d. FAT32

12. The ___________________ file system is the only one that supports file compression in
Windows 10.
a. FAT32
b. ReFS
c. NTFS
d. FAT
13. A le is currently compressed in its local le system. For security reasons, the le is required
to be encrypted. The le can be both compressed and encrypted. True or False?
14. A user is given Read permission to a le stored on an NTFS-formatted volume. The le is
then moved to a different folder on a different NTFS-formatted volume where the user has
been given Modify permission for that folder. The le is then moved to a folder on a FAT32-
formatted volume. When the user signs in to the computer holding the le and accesses it via
a drive letter, what is the user’s effective permission to the le?
a. Read
b. Change
c. Full control
d. Modify
e. No permissions apply
15. When assigning NTFS permissions, an ACE entry can explicitly dene who is denied access
to a resource. True or False?
16. A user is assigned Read permission to the NTFS folder C:ACCOUNTING. The user
requires full access to the folder C:ACCOUNTINGFORMS and its contents. This can be
accomplished by ___________________.
a. not possible
b. blocking permission inheritance at C:ACCOUNTINGFORMS and assigning the user
Full control to C:ACCOUNTINGFORMS
c. assigning the user Full control to C:ACCOUNTING
d. blocking permission inheritance at C:ACCOUNTING and assigning the user Full control
to C:ACCOUNTINGFORMS
e. assigning the user Full control to C:ACCOUNTINGFORMS
17. A user checks the free space in a folder, Y:BusReports, and notices that 3 GB of disk space is
reported as available. When the user checks free space in Y:BusReportsArchive, he notices
that 5 GB of disk space is reported as available. The difference in available disk space is
probably because the folder Y:BusReportsArchive is ___________________.
a. archived
b. compressed
c. encrypted
d. dynamic
e. a mount point
18. Upon opening the Disk Management console, you notice a disk whose status is reported as
Foreign Disk. This is most likely because ___________________.
a. the disk’s Unicode property is enabled
b. the disk has been corrupted
c. the disk is shared on the network
d. the disk was moved from another computer

19. A user is given Read permission to a le stored on an NTFS-formatted volume. The le is
then moved to a different folder on a different NTFS-formatted volume where the user has
been given Full control permission to that folder. When the user signs in to the computer
holding the le and accesses its new location via a drive letter, what is the user’s effective
permission to the le?
a. Read
b. Full control
c. No access
d. Modify
e. none of the above
20. A user is given Read permission to a le stored on an NTFS-formatted volume. The le
is then moved to a folder on the same NTFS-formatted volume where the user has been
given Modify permission to that folder. When the user signs in to the computer holding
the le and accesses its new location via a drive letter, what is the user’s effective permission
to the le?
a. Read
b. Full control
c. No access
d. Modify
e. none of the above

Explanation / Answer

1. c. UEFI

It is replacement of BIOS and used as muticast directlu when it bootsup and aslo secure boot.

2. d. initialized

3. space

4. e. removed

5. d. Device Manager

6. a. DiskPart

b. Disk Management console

7. d. 5

8. d. Storage Spaces

9. b. fsutil

10. c. NTFS

11. a. NTFS

d. FAT32

12. NTFS

13. false

14. e. No permissions apply

15. True

16. e. assigning the user Full control to C:ACCOUNTINGFORMS

17. e. a mount point

18. d. the disk was moved from another computer

19. b. Full control

20. b. Full control

Related Questions

Navigate

• Browse (All)
• Browse 1
• Subjects

Integrity-first tutoring: explanations and feedback only — we do not complete graded work. Learn more.