The system has two single-bit inputs U and D each coming from a button, and a 16

Question

The system has two single-bit inputs U and D each coming from a button, and a 16-bit output C, which is initially 0. For each press of U, the system increments C. For each press of D, the system decrements C. If both buttons are pressed, the system does not change C. The system does not roll over; it goes no higher than the largest C and no lower than C=0. A press is detected as a change from 0 to 1; the duration of that 1 does not matter. Define the HLSM, determine the components that go into datapath, draw the control FSM, and define the connections between datapath and control.

Explanation / Answer

HLSM : The hybrid linear stepping motor (HLSM).

The forcer is the moving part with two rare-earth magnets

consists of two parts: theforcer (also called the slider) and the variable reluctance platen

· Datapath is the hardware that performs all the required operations, for example, ALU, registers, and internal buses.

· Control is the hardware that tells the datapath what to do, in terms of switching, operation selection, data movement between ALU components, etc.

Related Questions

Navigate

• Browse (All)
• Browse T
• Subjects

---

---

Integrity-first tutoring: explanations and feedback only — we do not complete graded work. Learn more.