__________ electrodes have a forceful arc with little slag left on the weld bead
ID: 3278215 • Letter: #
Question
__________ electrodes have a forceful arc with little slag left on the weld bead. E6010 and E6011 E6012 and E6013 E7013 and E7018 E7019 and E7020 The ___ weave pattern is often used for flat position welds on butt, tee, and outside corner joints. circular square J T Some electrodes may not remove the deposits ahead of the molten weld pool, resulting in ________. discontinuities within the weld burnthrough excessive spatter electrode discoloration To correct a(n) ________ problem, a welder can use a smaller electrode at a lower current setting. overheating spatter penetration slag buildup The ____________ pattern can be used if there is a large gap to be filled when both pieces of metal are size and thickness. circular square J T the appropriate word(s) to complete the statement A straight weld bead on the surface of a plate with little or no side-to-side electrode movement is ________. A(n) ___________ joint is made by tack welding two flat pieces of plate together. A(n) _________ joint is made by placing the edges of the plates together evenly, between the plates. A(n) ________ electrode angle pushes the molten metal and slag ahead of the A(n) ___________ is a large piece of metal used to absorb excessive heat.Explanation / Answer
30 : Stringer beads
31 : E6010 and E6011
32. : Circular
33 : discontinuities within the weld
34 : overheating
35 : square
36 : stringer bead
37 : square butt joint
38 : edge weld
39 : leading
40 : chill plate
Related Questions
Navigate
Integrity-first tutoring: explanations and feedback only — we do not complete graded work. Learn more.