1. Rule #1 is often referred to as. . . a. The independence principle b. The LMC

Question

1. Rule #1 is often referred to as. . . a. The independence principle b. The LMC rule c. Perfect form at MMC d. The straightness rule

2. Rule #2 states __________ is the default condition for all geometric tolerances. a. FOS b. MMC c. RFS d. LMC

3. The topic of Rule #2 is. . . a. The default condition for all geometric tolerances b. The pitch diameter of threads c. Implied angles d. Tolerance of position

4. Rule #1 states "Perfect form. . . a. At LMC b. At MMC c. And orientation at LMC d. And orientation at MMC

5. On the drawing to the left, how many dimensions does Rule #1 apply to? a. 1 b. 2 c. 3 d. 4

6. ____________ is the worst-case boundary generated by the collective effects of a feature of size specified at MMC or LMC and the geometric tolerance for that material condition. a. Geometric condition b. Virtual condition c. MMC d. Basic condition

7. One use for basic dimensions is to describe datum target locations. T or F

8. The virtual condition of the pin diameter is. . . a. 10.8 b. 9.8 c. 10.6 d. 10.0

9. Bonus tolerance is permissible whenever an MMC, LMC, or projected tolerance zone modifier is shown in the tolerance portion of the feature control frame. T or F

10. A virtual condition boundary is oriented relative to the datums, which are referenced in the feature control frame that is used to determine the virtual condition. T or F

Explanation / Answer

it must be some test, need drawing on question 5 and 8

Related Questions

Navigate

• Browse (All)
• Browse 1
• Subjects

Integrity-first tutoring: explanations and feedback only — we do not complete graded work. Learn more.