you should have identified and worked out an agreement with an organization to c
ID: 396620 • Letter: Y
Question
you should have identified and worked out an agreement with an organization to complete your final project. Please create a Microsoft® Word document and submit the name of the organization where the activities will be completed. Further, you should note the job that you plan to analyze and note the specifics of your detailed inspection. In other words, the job activity and equipment you plan to inspect. Throughout the remainder of the course, we will address specific workplace hazards and controls. This information can be used to develop your general inspection forms and more specifically, detailed inspection forms.
1. Develop a general inspection form to assess a work facility or work unit (include in Appendices)
2. Develop a detailed inspection form targeting specific workplace hazards associated with an activity and equipment (include in Appendices)
3. Coordinate with a work organization to conduct a general inspection of a work facility or work unit and conduct a detailed inspection of a specific workplace activity and related equipment (use the forms you developed)
4. Develop a report summarizing inspection results, including a risk assessment of hazards identified and recommendations for hazard control if deficiencies were noted
5. Summarize the results of a completed job safety analysis and include a completed analysis form in the paper submission (place completed form in appendices)
Explanation / Answer
1. Prepare the general inspection form to assess a work facility or work unit using below mentioned points:
Work environment
Yes
No
N/A
Is the workplace temperature adequate?
Is there proper ventilation facilities?
Is there adequate lighting?
Is there any visible damage to workstations, walls, doors or ceilings?
Are there proper safety and security measures established?
Access (internal and external)
Yes
No
N/A
Are the footpaths and flooring clean and safe from falls or slip hazards?
Are the staircases handrails are in good condition?
Are the doors and windows constructed properly?
Are there proper signs and artifacts used in the premises?
Restroom and meals facility
Yes
No
N/A
Are the restrooms clean and maintained?
Is the food preparation and serving areas are clean and hygienic?
Are there proper facilities in restrooms for female employees, especially pregnant women and nursing mothers?
Are there proper furniture provided in these areas?
Safety measures
Yes
No
N/A
Is there required number of fire escape routes?
Are the fire doors unobstructed and easily operable?
Are proper exit signs and notices/instructions present at the workplace?
Are fire extinguishers in working condition and accessible?
2. Prepare the detailed inspection form targeting specific workplace hazards associated with equipment using below mentioned points:
Equipment
Yes
No
N/A
Is the equipment is in correct working condition?
Is the equipment properly maintained time-to-time?
Is the electric equipment which is not in used switched off after use?
Is the equipment visually inspected before use?
Are the workers given proper training before the use of equipment?
Are emergency stop controls installed properly?
Are the usage instructions and manuals provided with the equipment?
On the basis of above forms you can complete rest of the activities.
Work environment
Yes
No
N/A
Is the workplace temperature adequate?
Is there proper ventilation facilities?
Is there adequate lighting?
Is there any visible damage to workstations, walls, doors or ceilings?
Are there proper safety and security measures established?
Related Questions
Navigate
Integrity-first tutoring: explanations and feedback only — we do not complete graded work. Learn more.