s. Put the cabling below in order from lowest bandwidth to highest bandwidth. 1

Question

s. Put the cabling below in order from lowest bandwidth to highest bandwidth. 1 is lowest. Coaxial Cable Fiber Optics Unshielded Twisted Pair 6. Answer the following multiple choice questions concerning Chapter 6 6.1 What type of twisted-pair cabling would work best in horizontal cables? a. solid core b. stranded core 6.2 What are you trying to discover when you test a cable for continuity? A. A broken wire C. Length of the cable radio interference B. Bandwidth of the cable D. Presence of electrical or 6.3 An UTP connection is 10 meters between the NIC and the wall plug in the work area, 90 meters from plug to wiring closet, and 10 meters from the patch panel to the switch in in the telecommunications room, Your computer cannot connect. What should you do? a. Upgrade the connection to be faster b. Look for crosstalk e. Increase the air conditioning in the telecommunications room d. Shorten the total length of the run to less than 100 meters. . Explain why each topic below is an issue that must be considered in the design of a telecommunications room. a. Power b. Cooling e. Lock on door

Explanation / Answer

If you have any problem with the answer just let me know in the comments and I'll try to solve it as soon as possible. Also we are required to do only 4 parts of a question and will do others if have free time.

5. The bandwidth of Coaxial cable is 80 times the bandwidth of unshielded twisted pair and bandwidth of Optical Fibre is 25000 times the bandwidth of unshielded twisted pair.

There the correct order will be

2 - Coaxial cable

3 - Fibre optics

1 - Twisted pair

6.

(a.) Solid core cabling is used for long distance transmission and for short distance, flexible transmission Stranded cabling is used. Hence the correct option is b. Stranded cabling.

(b) Continuity test is done to check if circuit between two points is open or close i.e if current flows through them. Hence the correct option is A. Broken wire.

(c.) The total length for Ethernet connection should be less than 100m which includes the length of wire to patch panel . So the correct option is D. Shorter the length of wire to less than 100m

Related Questions

Navigate

• Browse (All)
• Browse S
• Subjects

---

---

Integrity-first tutoring: explanations and feedback only — we do not complete graded work. Learn more.