Whenever LOAD = 1, the counter state (Q_3 Q_2 Q_1 Q_0) takes on the value suppli
ID: 3849885 • Letter: W
Question
Whenever LOAD = 1, the counter state (Q_3 Q_2 Q_1 Q_0) takes on the value supplied by the parallel load inputs (D_3 D_2 D_1 D_0) on a clock trigger. When LOAD = 1, the value of COUNT does not matter. When LOAD = 0 and COUNT = 1, the counter state increments by 1 on a clock trigger. If LOAD = 0 and COUNT = 0, the counter state remains unchanged on a clock trigger. A divide-by-n counter is one that cycles through the binary states that correspond to the numbers from 0 (n - 1). The binary counter shown above operates naturally as a divide-by-16 counter, since on its own the counter cycles through the binary states that correspond to the numbers from 0 to 15: 0000 - 0001 - 0010 - 0011 - 0100 - 0101 - 0110 - 0111 - 1000 -1001 - 1010 -1011 -1100 -1101 -1110 - 1111 - 0000 -.... With an additional AND gate, a designer could use the same counter to implement a divide-by-n counter for any nExplanation / Answer
Pass the 0 as an input to the load inputs whenever want to rest the counter. That will pass all the 0’s to the output Q0, Q1, Q2, Q3 and reset the counter.
So the logic should be the Take the AND gate and take input as the value n and LOAD = 1 so that input 0’s can be passes to reset the counter. And Remaining time Set Load = 0 and Count =1 to increment the counter till n.
Pass the 0 as an input to the load inputs whenever want to rest the counter. That will pass all the 0’s to the output Q0, Q1, Q2, Q3 and reset the counter.
So the logic should be the Take the AND gate and take input as the value n and LOAD = 1 so that input 0’s can be passes to reset the counter. And Remaining time Set Load = 0 and Count =1 to increment the counter till n.
Pass the 0 as an input to the load inputs whenever want to rest the counter. That will pass all the 0’s to the output Q0, Q1, Q2, Q3 and reset the counter.
So the logic should be the Take the AND gate and take input as the value n and LOAD = 1 so that input 0’s can be passes to reset the counter. And Remaining time Set Load = 0 and Count =1 to increment the counter till n.
Related Questions
drjack9650@gmail.com
Navigate
Integrity-first tutoring: explanations and feedback only — we do not complete graded work. Learn more.