Troubleshooting Scenario(Cisco Packet Tracer Student) Configure the DHCP server
ID: 3849517 • Letter: T
Question
Troubleshooting Scenario(Cisco Packet Tracer Student)
Configure the DHCP server with the following IP address information
IP address: 172.17.13.253
Subnet Mask: 255.255.255.0 (NOTE: THIS IS NOT THE DEFAULT)
Default Gateway: 172.17.13.1
Configure the DHCP server with the following DHCP pool information
Default Gateway: 172.17.13.1
DNS Server: 172.17.11.16
Start IP Address: 172.17.13.10
Subnet mask: 255.255.255.0 (NOTE: THIS MAY NOT BE THE DEFAULT)
Max Number of Users: 30
Configure the DNS server with the following IP address information
IP address: 172.17.11.16
Subnet Mask: 255.255.255.0 (NOTE: THIS IS NOT THE DEFAULT)
Default Gateway: 172.17.11.1
Configure the PCs to obtain an address automatically from the DHCP server
Configure the router with the following IP information
FastEthernet0/0: IP Address: 172.17.13.1 Subnet Mask: 255.255.255.0 (NOTE: THIS IS NOT THE DEFAULT)
FastEthernet0/1: IP Address: 172.17.11.1 Subnet Mask: 255.255.255.0
Click on the Settings button on the Config tab.
Click the Save button next to the NVRAM button to save your configuration on the Cisco Router. Failure to do this will cause your configuration to be lost when the router restarts
If everything has been configured correctly, you should be able to ping the “DNS” server from any of your PCs.
( I am still not getting any of the PCs to ping the DNS?)
Server- DHCP 60-24TT Classroom Switch1 PC PC3 PCO 2960-24TT PC-PT Station switcho PC-PT PC1 1841 Router 2960-24TT Switch2 Server-PT DNSExplanation / Answer
Open the server and go to the Desktop tab, click IP Configuration and enter the IP address.
Now, go to the Config tab.
Now, go to the Config tab.
i. Enter IP for default Gateway. (172.17.13.1)
ii. Start IP address (172.17.13.10)
iii.. Maximum number of Users. (30)
iv. Click Save.
Now, click on any PC that is attached to the server, go to IP configuration and select DHCP. You will see that DHCP will successfully assign IP address to the PC
Now, if we go back to server and assign DNS Server address and then go to any PC and select DHCP.
It will also assign DNS to the PC as well.
We can also open the website of the server through any PC by going to the Web Browser option and entering the IP address of the server.
And we can ping the server by going to the PC’s command prompt and entering server’s IP address.
Related Questions
drjack9650@gmail.com
Navigate
Integrity-first tutoring: explanations and feedback only — we do not complete graded work. Learn more.