Last week, a disk on a Windows Server 2012 system that contained CSM Tech Publis
ID: 3597657 • Letter: L
Question
Last week, a disk on a Windows Server 2012 system that contained CSM Tech Publishing’s current project manuscripts crashed. Fortunately, there was a backup, but all files that had been added or changed that day were lost. No RAID configurations were in use. A new disk had to be purchased for overnight delivery, and the data had to be restored. A couple days of work were lost. The owner of CSM Tech wants to know what can be done to prevent the loss of data and time if a disk crashes in the future. The server currently has two disks installed: one for the Windows boot and system volumes and one for manuscript files. The disk used for manuscript files is about one-third full. There’s enough money in the budget to purchase up to two new drives if needed. What solution do you recommend, and why?
< i need to turn this into a couple hundred word essay response, so looking for some ideas to write about. so i try not to answer this is in just one or two sentences. >
Explanation / Answer
CSMA/CD
The media access control method of all Ethernet networks is ___________________.
The device listens to determine if the transmission media is free.
A network is connected following the IEEE 802.3 specifications. Which of the following best describes when a device can transmit messages?
10BaseT & 1000BaseT
Which of the following use the CSMA/CD access method? Select all that apply.
Bus and Star
Which of the following physical topologies are used with Ethernet networks? (Select two.)
Fiber optic
Ethernet 100BaseFX networks use what type of cabling?
100BaseFX & 1000BaseLX
Which of the following Ethernet standards uses fiber optic cabling? (Select two.)
100 meters
Your network follows the 100BaseTx specifications for Fast Ethernet. What is the maximum cable segment length allowed?
100 meters
With an Ethernet 10BaseT network, the maximum cable length between a computer and the hub is __________.
10BaseSR &1000BaseSX
You have been tasked with designing an Ethernet network. Your client needs to implement a very high-speed network backbone between campus buildings; some of which are around 300 meters apart. Multimode fiber-optic cabling has already been installed between buildings. Your client has asked that you use the existing cabling.
Which Ethernet standard meets these guidelines? (Choose two.)
Type 1A STP or Category 5 UTP
What type of cabling is used with 100BaseTX Fast Ethernet networks?
Physical star/logical bus & Physical star/logical star
What topology is used with 100BaseTX Fast Ethernet networks? (Select two.)
CAT 5 cabling & RJ-45 connectors & The cable length must be less than or equal to 100m
Which of the following are requirements of the 1000BaseT Ethernet standards? (Select three.)
Related Questions
Navigate
Integrity-first tutoring: explanations and feedback only — we do not complete graded work. Learn more.