Enable IPv6 EUI Execute the ipv6 unicast-routing command Enable SLAAC for VLAN 1

Question

       Enable IPv6 EUI
       Execute the ipv6 unicast-routing command
       Enable SLAAC for VLAN 10
       Enable port forwarding for SLAAC on the switch
       Execute ipv6 enable

(TCO 6) A network engineer configures a router with the following commands.
Ro3(config)# interface F0/5
Ro3(config-if)# ipv6 address 2005:AC9:5B:1::1/64
Ro3(config-if)# no shut
Ro3(configif)# end
The router is connected to a switch in VLAN 10 and is working correctly on that VLAN. A network engineer configures a new computer to use SLAAC and assigns the computer to VLAN 10. The computer is unable to obtain the correct IPv6 prefix and prefix length. What is wrong? (Points : 2)

Explanation / Answer

The ip nat inside source command to link the inside local and inside global addresses*
-->an ACL to identify the local IPv4 address of the web server
-->the keyword overload for the ip nat inside source command
-->an IPv4 address pool

Related Questions

Navigate

• Browse (All)
• Browse E
• Subjects

---

---

Integrity-first tutoring: explanations and feedback only — we do not complete graded work. Learn more.