1. In a networking context, what is a protocol? 2. what is the major protocol us
ID: 3569067 • Letter: 1
Question
1. In a networking context, what is a protocol?
2. what is the major protocol used on the Internet?
3. At what OSI/ISO layer does IP operate?
1. What three pieces of information do you need to configure TCP/IP?
2. Is the IP address a single address?
3. When was classfull addressing last used?
4. What are the three major classes of addresses?
1. What is DNS? What does it do?
2. What is DHCP? What does it do?
3. Which proprietary Microsoft protocol was used in early versions of Microsoft Windows?
4. Which protocol is used to resolve a fully qualified domain name to an IP address?
1. In a TCP/IP context, what is a port?
2. What is a non-ephemeral port?
3. What is meant by the term "well known" port?
4. Compare and contrast TCP and UDP ports.
1. What port does the DNS service utilize?
2. What port does the HTTPS protocol utilize?
3. What is the protocol SMTP and what port does it use?
1. How does Professor Messer define a network?
2. What is a network Topology? And who makes Network Topology Standards?
3. What is the most popular form of consumer networking?
4. What is the term that describes a network that can communicate in both directions at the same time?
5. What differentiates a LAN from a WAN?
1. What is the most widely used protocol in the world?
2. Compare and contrast the lengths of IPV4 and IPV6.
3. Is this a valid IPv4 address: "192.1.325.12"?
4. Is this a valid IPv6 address: "a::b::c"?
1. What is the alliance of trade associations that makes network cabling standards?
2. What is the Commercial Building Telecommunications Cabling Standard that we use for cabling?
3. What is the most common physical type of cabling?
4. What category of copper cable support 100 Mbits Ethernet?
5. What category of copper cable supports 10 Gbits Ethernet through 55 meters?
1. What is plenum rated cable?
2. What type of cable did Ethernet originally use? Hint, same type of cable as used in cable TV.
3. What is the type of cable that is most suited for sending signals a long distance?
4. If you were connecting machines within a data center, what type of fiber would you be most likely to use?
5. If you were connecting two remote buildings, what type of fiber would you be most likely to use?
6. What type of jack would you use for Ethernet?
7. What type of jack would a conventional wired telephone use?
1. What type of high speed network can run over telephone lines?
2. What type of high speed network can run over coax cable?
3. Of the popular types of home high speed networks utilizes non-terrestrial networks that typically have a high latency?
1. What was Bluetooth originally designed to replace?
2. What type of network does Bluetooth create?
1. What is the IEEE family of standards for wireless networking?
2. How do the different members of the 802.11 family differ?
3. Which 802.11 standard utilizes MIMO?
4. Which 802.11 standard represents an improvement, and backwards compatibility, with 802.11b?
1. What was the original encryption utilized by 802.11?
2. When were WEP cryptographic vulnerabilities identified?
3. What type of encryption was created to improve on WEP but utilize the same hardware?
4. What type of wireless encryption is based on the Advanced Encryption Standard (AES)?
1. In wireless networking, what is an SSID?
2. True or False. Disabling SSID broadcast is an important security configuration.
3. What is the general security term used to describe the disabling of SSID broadcast?
4. Can MAC addresses be spoofed?
5. What wireless networking standard supports speeds up to 600 megabits per second?
Explanation / Answer
What is a Protocol?
A uniform set of rules that enable two devices to connect and transmit data to one another. Protocols determine how data are transmitted between computing devices and over networks. They define issues such as error control and data compression methods. The protocol determines the following: type of error checking to be used, data compression method (if any), how the sending device will indicate that it has finished a message and how the receiving device will indicate that it has received the message. Internet protocols include TCP/IP (Transfer Control Protocol/Internet Protocol), HTTP (Hypertext Transfer Protocol), FTP (File Transfer Protocol), and SMTP (Simple Mail Transfer Protocol).
2) what is the major protocol used on the Internet?
The Internet protocol suite is therefore often referred to as TCP/IP. The first major version of IP, Internet Protocol Version 4 (IPv4), is the dominant protocol of the Internet. Its successor is Internet Protocol Version 6 (IPv6).
Related Questions
Navigate
Integrity-first tutoring: explanations and feedback only — we do not complete graded work. Learn more.