5. Silven Industries, which manufactures and sells a highly successful line of s

Question

5. Silven Industries, which manufactures and sells a highly successful line of summer lotions and insect repellents, has decided to diversify in order to stabilize sales throughout the year. A natural area for the company to consider is the production of winter lotions and creams to prevent dry and chapped skin.

After considerable research, a winter products line has been developed. However, Silven’s president has decided to introduce only one of the new products for this coming winter. If the product is a success, further expansion in future years will be initiated.

The product selected (called Chap-Off) is a lip balm that will be sold in a lipstick-type tube. The product will be sold to wholesalers in boxes of 24 tubes for $11 per box. Because of excess capacity, no additional fixed manufacturing overhead costs will be incurred to produce the product. However, a $99,000 charge for fixed manufacturing overhead will be absorbed by the product under the company’s absorption costing system.

Using the estimated sales and production of 110,000 boxes of Chap-Off, the Accounting Department has developed the following manufacturing cost per box:

The costs above relate to making both the lip balm and the tube that contains it. As an alternative to making the tubes for Chap-Off, Silven has approached a supplier to discuss the possibility of buying the tubes. The purchase price of the supplier's empty tubes would be $1.70 per box of 24 tubes. If Silven Industries stops making the tubes and buys them from the outside supplier, its direct labor and variable manufacturing overhead costs per box of Chap-Off would be reduced by 10% and its direct materials costs would be reduced by 20%.

equired:

1. If Silven buys its tubes from the outside supplier, how much of its own Chap-Off manufacturing costs per box will it be able to avoid? (Hint: You need to separate the manufacturing overhead of $2.30 per box that is shown above into its variable and fixed components to derive the correct answer.)

2. What is the financial advantage (disadvantage) per box of Chap-Off if Silven buys its tubes from the outside supplier?

3. What is the financial advantage (disadvantage) in total (not per box) if Silven buys 110,000 boxes of tubes from the outside supplier?

4. Should Silven Industries make or buy the tubes?

5. What is the maximum price that Silven should be willing to pay the outside supplier for a box of 24 tubes?

6. Instead of sales of 110,000 boxes of tubes, revised estimates show a sales volume of 150,000 boxes of tubes. At this higher sales volume, Silven would need to rent extra equipment at a cost of $60,000 per year to make the additional 40,000 boxes of tubes. Assuming that the outside supplier will not accept an order for less than 150,000 boxes of tubes, what is the financial advantage (disadvantage) in total (not per box) if Silven buys 150,000 boxes of tubes from the outside supplier? Given this new information, should Silven Industries make or buy the tubes?

7. Refer to the data in (6) above. Assume that the outside supplier will accept an order of any size for the tubes at a price of $1.70 per box. How many boxes of tubes should Silven make? How many boxes of tubes should it buy from the outside supplier?

Direct material $ 5.10 Direct labor 3.40 Manufacturing overhead 2.30 Total cost $ 10.80 Complete this question by entering your answers in the tabs below Req 2 Req 3 Req 4 Req 5 Req 6 Req 7 Req 1 If Silven buys its tubes from the outside supplier, how much of its own Chap-Off manufacturing costs per box will it be able to avoid? (Hint: You need to separate the manufacturing overhead of $2.30 per box thet is shown above into its variable and fixed components to derive the correct answer.) (Do not round intermediate calculations. Round your answer to 2 decimal places.) show less Avoidable manufacturing costs per box of Chap-Off

Explanation / Answer

1. Amount of manufacturing cost per box of Chap - Off that can be avoided :$ 1.50.

Variable Manufacturing Cost per unit = ( 110,000 x $ 2.30 - $ 99,000) / 110,000 = $ 1.40.

2. Financial advantage ( disadvantage) per box = Avoidable Manufactuuring Cost - Cost of Outsourcing = $ 1.50 - $ 1.70 = $ ( 0.20)

3. Total financial advantage ( disadvantage) = 110,000 x $ ( 0.20) = $ ( 22,000).

4. Silven Industries should make the tubes.

5.The maximum price that Silven Industries would be willing to pay the outside supplier for a box of tubes : $ 1.50.

6. Financial advantage ( disadvantage ) = $ 30,000.

Financial advantage ( disadvantage) = Cost of Make - Cost of Buy = [( 150,000 x $ 1.50) + 60,000] - ( 150,000 x $ 1.70 = $ 30,000.

Silven Industries should buy the tubes.

7. Upto 110,000 units, Silven Industries should make the tubes.

If the demand is between 110,001 units and 300,000 units, Silven Industries should make 110,000 tubes, and buy the excess from the outside supplier.

If the demand crosses 300,000 units, Silven should make, provided no additional equipment is required.

[ Break-even point = Cost of Equipment / Financial advantage of make per unit = $ 60,000 / $ 0.20 = 300,000 units]

Avoidable Direct Materials Cost ( $ 5.10 x 20%) $ 1.02 Avoidable Direct Labor Cost ( $ 3.40 x 10%) 0.34 Avoidable Variable Manufacturing Overhead ( $ 1.40 x 10%) 0.14 Manufacturing Cost per unit that be avoided by outsourcing $ 1.50

Related Questions

Navigate

• Browse (All)
• Browse 5
• Subjects

---

---

Integrity-first tutoring: explanations and feedback only — we do not complete graded work. Learn more.