stion 2 (1 point) Given the following information (ignore the top posts on the L

ID: 2321291 • Letter: S

Question

stion 2 (1 point)

Given the following information (ignore the top posts on the LEGO bricks):

The short blocks have a thickness of 3.20±.01 mm

The tall blocks have a thickness of 9.60±.01 mm

When the stack is the TALLEST: Where will there be gaps between the parts?

Question 2 options:

EITHER OF THE LOCATIONS CIRCLED IN RED

EITHER OF THE LOCATIONS CIRCLED IN BLUE

BOTH THE RED AND THE BLUE CIRCLED LOCATIONS

NEITHER OF THE CIRCLED LOCATIONS

EITHER OF THE LOCATIONS CIRCLED IN RED

EITHER OF THE LOCATIONS CIRCLED IN BLUE

BOTH THE RED AND THE BLUE CIRCLED LOCATIONS

NEITHER OF THE CIRCLED LOCATIONS

>> Now, as tolerance of each smaller block is 0.1 mm

and, of taller block is also 0.1 mm

But, seeing thickness wise, One Taller Block is equal to three smaller blocks

>> Now, assume the case, when taller block is made first with its maximum thickness, i.e. 9.6 + 0.1 = 9.7 mm

The, all smaller blocks can be made to complete this task.

>> But, if all smaller blocks are made with their tolerances i.e. their maximum thickness of 3.2 + 0.1 = 3.3 mm

Then total thickness will be 9.9 mm

But, taller block can be upto only 9.7 mm

So, there will be a gap of9.9 - 9.7 = 0.2 mm , in BLUE Locations...

So, Option is (2).......ANSWER......

Integrity-first tutoring: explanations and feedback only — we do not complete graded work. Learn more.