What parameter must be set on the GSI drives to be able to operate the drive fro

Question

What parameter must be set on the GSI drives to be able to operate the drive from the control terminals. What parameter number is the motor voltage? What parameter number is the motor current? What parameter number is used to set Forward Stop to Digital Input 1 & Reverse Stop to Digital Input 2? What speed will a three phase induction motor run at if the applied frequency is 30 hz? What speed will a three phase induction motor run at if the applied frequency is 52 hz? What terminal is used to start & stop the SR22 soft start? What terminal is used to enable the SR22 soft start? A separate 24 volt de supply has to be wired to the GSI drive? T or F A separate 24 volt de supply has to be wired to the SR22 soft start? T or F

Explanation / Answer

1- In GS1 Ac drives the parameter p3.00 is used to select the source of operation command. Select 1 inside parameter p3.00 to set the command to control terminals.

2- Parameter P0.00 is used to set the motor nameplate voltage.

3- Parameter P0.01 is used to set the motor nameplate current.

4- To set the forward/stop to 1 and reverse/stop to 2 the parameter p3.00 must be set to 2. Because this parameter defines whether u r using digital keypad to start /stop the motor or control terminals to start/stop. Since digital input 1 and digital input 2 are on the control terminals u must set p3.00 to 2.

THANK YOU.

Related Questions

Navigate

• Browse (All)
• Browse W
• Subjects

---

---

Integrity-first tutoring: explanations and feedback only — we do not complete graded work. Learn more.