Programming the part- Let\'s assume that the wax you were given is 3.040 as an a
ID: 2074203 • Letter: P
Question
Programming the part- Let's assume that the wax you were given is 3.040 as an as cut length. Your touch off in EMCO SPEAK will be X1500 Z20. In other words you are 20 [.020] off of the end of the part. You will face off 40 [040] using a facing cycle. The part will now be 3.000 long. .Efficiently program the lathe to turn the 01.000, o.750, and 0.500 sections Use a turning cycle for each of these sections. The original diameter of the WAX was 01.320. . Including your face off, the part will be 3.000 inches long and each of the turned down areas will be the correct length. . Include a safety line at the end. | End the program with an M30 and END as we usually do.Explanation / Answer
PLEASE NOTE: LENGTH OF EACH TURNING IS NOT MENTIONED SO i TOOK L1,L2,L3,L4 FROM RIGHT SIDE OF THE JOB
N01 G00 G71 G20 G90 G94;
N02 M06 T01;
N03 M03 S1500;
N04 M08;
N05 G00 X22 Z0.5;
N06 G01 X0 F200;
N07 Z0;
N08 X0.5;
N081 Z-0.04;
N09 Z-L1;
N10 X0.75 Z-L1;
N11 Z-L2;
N12 X1 Z-L2;
N13 Z-L3;
N14 X1.32 Z-L3;
N15 Z-L4;
N16 Z-L4+0.02
N16 G00 X1.4 Z0;
N17 G28 X0 Z0;
N18 M09;
N19 M30;
Related Questions
Navigate
Integrity-first tutoring: explanations and feedback only — we do not complete graded work. Learn more.