EGR 110 Engineering Graphics Inventor Assignment #1 Computer Assignment: Create
ID: 2073342 • Letter: E
Question
EGR 110 Engineering Graphics Inventor Assignment #1 Computer Assignment: Create a solid model of the plate according to the following specifications: Create a sketch in Inventor using the dimensions provided. You may need to add additional dimensions (at this time) to properly locate and size all features. All dimensions should be neatly placed . Add text under the sketch as follows Your name EGR 110-Engineering Graphics Inventor Assignment # 1 Extrude the sketch to the specified thickness and switch to an isometric view Use ROTATE to rotate the isometric such that it looks similar to the figure shown in the text (for example, you should be able to see through the holes. Print the sketch using FILE-PRINT (note that this is not how we will print drawings later in the course). Print the isometric using FILE-PRINT (note that this is not how we will print drawings later in the course). Staple the two drawings together and submit them to the instructor 1.25 25 2.5 1.71 1.25 4.0Explanation / Answer
First Click on Sketch and draw that sketch using
1) Line Command
(first draw 4.0 then 1.75 from both sides in up direction, then choose centerline which will divide 4 into equal half i.e 2.0 in upward direction, then 1.25/2 from that centerline which will be 2.5 up from bottom 4.0 line. then in the last join it by 1.75 corners. )
2) Once sketch command will be done
3) use extrude command and choose this sketch and then it will ask you thickness and then give 0.25
4) after that use hole command and give cordinate for each hole (0.25 from down and 0.25)
5) then choose again hole command for second circle and then give again same cordinate
6) then choose again hole command for big circle and will do the same procedure.
7) for isometric view just use rectangle box which is given in right corner of screen and click on corner side of that box
8) then you can print those isometric views by using print command which is given in file
Related Questions
Navigate
Integrity-first tutoring: explanations and feedback only — we do not complete graded work. Learn more.