Using the ANSI Fit tables (see the reference sheet on D2L from our previous note

Question

Using the ANSI Fit tables (see the reference sheet on D2L from our previous notes). we will apply an LC4 fit to the shall and hub diameters. Find the limits for the diameter of the hole (max/min size) Find the limits for the diameter of the shift (max/min size) During manufacturing, we intend to turn the diameter of the shaft on a lathe (click for a video). Using the manufacturing precision chart in your notes, determine if turning can provide the necessary precision for the shaft. When manufacturing the hole in the hub. should the hole be produced by drilling, or by reaming? We want to apply a similar locational fit between the key and the keyways which it will fit into. This time however, we will be purchasing the key (and tolerances) shown in the figure above. What are the limits of clearance for a 1/4" Fit, according to the ANSI Tables? Find the limits of size for the keyseat in the shaft which will provide the clearances from (a). Find the limits of size for the keyway in the hub which will provide the clearances from (a). (Note: We'll examine manufacturing for the keyways in question three) Due: By next class Given The following information: Basic size of the shaft and hub bore is 1.000" Basic size of the keyway is .25" square

Explanation / Answer

do u want a procedure or answers

Related Questions

Navigate

• Browse (All)
• Browse U
• Subjects

---

---

Integrity-first tutoring: explanations and feedback only — we do not complete graded work. Learn more.