True False Fill in the blank. If the statement is false, please identify each fa

Question

True False Fill in the blank. If the statement is false, please identify each false statement and correct them. Thermoplastic materials are polymers that don't have a melting point and can be sintered. Sintering is similar to melting and is used solid objects to powders. It can be used to make porous as well as fully dense objects and it usually can be accomplished at _____ of the melting temperature. The driving force for sintering is the increase in surface free energy that is caused by the elimination of porosity. Bragg' Law can be used to determine the spacing between atoms in a non-crystalline material. If an x-ray diffraction peak occurs at 60 degrees two theta, the d spacing would be ______ nm (Assume that the wavelength is 0.154 nm). The (111) direction is perpendicular to the [100], [010], planes. The grain boundaries that make up the final microstucture in a sintered powder compact are examples of point defects. It impossible to achieve a complex material microstructure in which the interior grains are small and equiaxed and the exterior grains are larger and anisotropic. Passivation is corrosion that leads to failure in metallic implants. In a metal implant, you can simultaneously achieve higher strength and higher ductility by heat treating the sample to anneal out stresses. Phase diagrams are very useful in determining the types of phases that form when metals are mixed together. Ni and cu are examples of two metals that can form a complete solid solution just like Pb and Sn and both of these binary phase diagrams show a eutectic and have a eutectic microstructure which is a crisscrossed (plaid) pattern. Using a phase diagram for Ni and Cu from your notes, the relative amount of solid and liquid present at a Temperature of 850 C and a composition of 50% Ni is_____.

Explanation / Answer

A:- True

Explanation:- Thermoplastic is a polymer that is moldable at high temperature and solidifies on cooling.

Related Questions

Navigate

• Browse (All)
• Browse T
• Subjects

---

---

Integrity-first tutoring: explanations and feedback only — we do not complete graded work. Learn more.