The sketch shown in Figure 4 was created using two rectangles and removing a lin

Question

The sketch shown in Figure 4 was created using two rectangles and removing a line segment to make a slot having width sd4 and height sd5. In addition, a circular hole is located at a distance sd6 and sd7. Provide parametric relationships that ensure: The slot is centered with respect to the outer rectangle's width sd1. The circle is always centered between the slot lower edge and lower edge of the outer rectangle (as shown in the figure). The sketch is symmetric about the vertical line passing through the midpoint of the slot. Create the sketch that satisfies both (a) and (b) in CREO and use Relation Tool. Take the screen shot of the graphics and paste it in your answer sheet. (Note the relation tool and the equations should be shown in the graphics)

Explanation / Answer

a) Sd3 + Sd4/2 = Sd1 / 2

     2 * sd3   + sd4   = sd1

b)   sd2 - sd5 = 2*sd6       

      sd2   = sd5 + 2 * sd6

Related Questions

Navigate

• Browse (All)
• Browse T
• Subjects

---

---

Integrity-first tutoring: explanations and feedback only — we do not complete graded work. Learn more.