c) Responsible for assembling the steel into a frame on the building site d Veri
ID: 1710066 • Letter: C
Question
c) Responsible for assembling the steel into a frame on the building site d Verifying the steel was assembled in a manner it was designed for I MASON work is? a Brick and block work assembled for walls b) Erecting masonry cIA memory aid used to designate mortar in order of strength Done by assembling brick or block with mortar The second number in a W12x36 denotes the? Area Depth c Thickness Weight of pounds per foot 12 Flashing in masonry walls are used for? a Keeping water from penetrating inner layers of the building b) Stop water from entering outer layers of masonry c Keeping masonry from uncontrolled cracking dy All of the above Which is not a type of steel frame buildings? al Moment Resisting b) Shear d Post-Tensioned l4 Common components of reinforced masonry walls are? al Studs, sill plates, headers, Grout, wiee ties, reinforcing bats Brick, CMU, mortar dy Brick, studs, sueel MC denotes a? Angle b Wade Flange c Channel HSS square 16 Describe how a masonry eavity wall works and what aspects of cavity wall construction are most critical to its success in preventing water leakage?Explanation / Answer
1)
Done by assembling brick or block woth mortar. Any masonry work usuall consists of a bonding agent like mortar,
2)
The second dimension 36 in this case represents the weight of the section per foot in pounds.
3)
Masonry wall flashings are are typically required at locations where the downward flow of water inside the wall would be obstructed or interrupted. From the given options all of the above
4)
Post tensioned is a not a type of steel construction, It is a concrete construction.
5)
The reinforced masonry wall mainly consists of Grout, wire ties and reinforcing bars.
6)
MC stands for an- American Standard Channel . So it is a channel section.
Related Questions
drjack9650@gmail.com
Navigate
Integrity-first tutoring: explanations and feedback only — we do not complete graded work. Learn more.