U.S. environmental protection agency (epa) risk Management plan (rMp) audit prog

Question

U.S. environmental protection agency (epa) risk Management plan (rMp) audit program

There are several “exposures” that your facility must be prepared to deal with for the protection of your employees, such as having eyewash stations in case of an accidental splash into the eyes of a pathogen, infectious materials, or a chemical. Imagine that an accidental splash of bleach hit an employee’s eyes.

Create the documentation as required by the following two items that might be reviewed in an EPA audit. Itemize the required first-aid and emergency medical treatment, the emergency response protocols, and any other steps that must be taken during an exposure of this nature.

Section 112(r) of the Clean Air Act (CAA) requires EPA to publish rules and guidance for chemical accident prevention. The rules pro- mulgating the list of regulated substances (published January 31, 1994) and the Risk Management Program provisions (published June 20, 1996) are found at 40 CFR Part 68. The Risk Management Program contains three elements: a hazard assessment, a prevention program, and an emergency response program. The entire program is to be described and documented in an RMP, which is submitted to EPA. RMP audits help ensure compliance with the Risk Management Program. EPA may require companies to modify their RMP to ensure that the RMP meets the requirements of the regulation. A few of the elements required for compliance that will be reviewed during an audit are: 1. Documentation of proper first-aid and emergency medical treatment necessary to treat accidental human exposures 2. Procedures and measures for emergency response after an accidental release of a regulated substance are documented Source: United States Environmental Protection Agency.

Explanation / Answer

Your procedures for emergency response in the event of a release of a
regulated substance. This must include descriptions of the actions to be
taken by employees and other individuals on-site over the entire course of
the release event:
- Activation of alarm systems and interpretation of signals;
- safe evacuation, assembly, and return;
- Selection of response strategies and incident command structure;
- Use of response equipment and other release mitigation activities.

Proper fisrt aid:

1. Employees should be taken to the place where there is good supply of oxygen.

2. Application of tincture and some ointment to topical treatement of the injuries.

3. Basic Dressing to be done

4. Taken to the hospital if its emergency.

Related Questions

Navigate

• Browse (All)
• Browse U
• Subjects

Integrity-first tutoring: explanations and feedback only — we do not complete graded work. Learn more.